E-Learning
Rome wasn't built in a day. Because we are independent and completely self-funded, the development of the e-learning takes time. However, we can provide you with individual training and support until the release.
Sprache: DE
Language : EN
Estimated project duration:
Depending on scope, complexity and Possible existing structures
Total time: 1-2 months
Hours required: Variable as a package
Best implementation location:
online/at your company
Estimated project duration:
Depending on scope, complexity and Possible existing structures
Total time: 1-3 months
Hours required: Variable as a package
Best implementation location:
online/at your company
Estimated project duration:
Depending on scope, complexity and Possible existing structures
Total time: 1-2 months
Hours required: Variable as a package
Best implementation location:
online/at your company
Estimated project duration:
Depending on complexity 2-4 days
When everything is in place.
Best implementation location:
online/at your company
Geschätzte Projektdauer:
Depending on complexity 1-3 days
When everything is in place.
Best implementation location:
online/at your company
Estimated project duration:
Depending on scope, complexity and Possible existing structures
Total time: 2-6 months
Hours required: Variable as a package
Best implementation location:
online/at your company
Geschätzte Projektdauer:
Je nach Anforderung, Lieferzeiten sowie Ihrer Entscheidungsfreudigkeit.
Gesamtzeit: 3-12 Monate
Stundenaufwand: Variabel als Packet
Durchführungsort:
Online / Bei uns im Haus
Estimated project duration:
Depending on scope, complexity and Possible existing structures
Total time: 6-24 months
Hours required: Variable as a package
Location of implementation:
online/at your company
Geschätzte Projektdauer:
Je nach Anforderung und Projekt
Gesamtzeit: 2-6 Monate
Stundenaufwand: Variabel als Packet
Durchführungsort:
Online / Bei uns im Haus
Estimated training time:
Depending on previous knowledge of participants 2-4 days
Best location:
Online / At our facility / At your facility
Estimated training time:
Depending on previous knowledge
of participants 2-4 days
Best location:
Online / At our facility / At your facility
Estimated training time:
Depending on previous knowledge of participants 2-4 days
Best location
Online / At our facility / At your facility
Estimated training time:
Depending on previous knowledge of participants 1-2 days
Best location:
Online / At our facility
Estimated training time:
Depending on previous knowledge of participants 1-3 days
Best location:
Online / At our facility / At your facility
Estimated training time:
Depending on previous knowledge of participants 2-4 days
Best location:
Online / At our facility / At your facility
Estimated training time:
Depending on previous knowledge of participants 2-3 days
Best location::
Online / At our facility/ At your facility
Estimated training time:
Depending on previous knowledge of participants 2-4 days
Best location
Online / At our facility / At your facility
Estimated training time:
Depending on previous knowledge of participants 2-4 days
Best location:
Online / At our facility /At your facility
Estimated training time:
Depending on previous knowledge of participants 2-4 days
Best location:
Online / At our facility
Estimated training time:
Depending on previous knowledge of participants 2-4 days
Best location:
Online / At our facility
Estimated training time:
Depending on scope of training and prior knowledge 4-7 days
Best location:
Online / At our facility
Estimated training time:
Depending on tool and prior knowledge 2-4 days
Best location:
Online / At our facility
Estimated training time:
Depending on tool and previous knowledge 3-6 days
Best location:
Online / At our location
Estimated training time:
Depending on scope of training and prior knowledge of participants 4-7 days
Best location:
Online / At our location
Estimated training time:
Depending on scope of training and prior knowledge 3-6 days
Best location:
Online / At our location
Estimated training time:
Depending on tool and previous knowledge 2-4 days
Best location:
At your facility
There are several advantages to designing a tool with a special flute shape/wheel.
With a specially calculated flute shape/wheel, it is possible to produce cross sectional profiles that cannot be realized with normal wheels.
Another important advantage is that special geometries can be developed and patented.
– A new and unique material-specific flute shape would therefore be an outstanding feature. With all the advantages
– It is possible to develop geometries that are very material specific and perform significantly better than competing tools.
Tool features:
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
The winner in cost per part.
Means unmatched value for the customer.
Tool features:
Secure your training today and gain the knowledge you need to impress your customers with these fantastic tools in the future.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Many companies are still afraid of thread mills. High investment costs and a lack of know-how are the reasons why many prefer to keep their hands off an entire family of tools.
However, the profit margins for threading tools in particular are high and the competition is manageable.
Numroto offers a specific additional program for threading tools that is not officially advertised, but is very powerful.
We can calculate and simulate virtually all types of threads and simulate them entirely in 3D.
From very simple thread mills to drill thread mills or circular thread mills, everything is possible.
As an example, we have created a tool for you that includes some of the most advanced features.
Tool Features:
If you are planning to manufacture your own threading tools in the future, we will be happy to help you with the implementation.
Of course, we will also discuss the necessary grinding wheels and dressing technology.
Info:
Implementation requires precise planning and close cooperation.
However, you always have the choice: Buy only the tool or, if required, additional training.
— Only suitable for very experienced programmers or machine operators. —
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
A special type of step drill with an overhanging contour.
These tools can be made using a special technique and a special wheel.
Our example combines the O-ring function with that of the sub land step drill.
Like no other tool, it shows what is possible in the field of step drills.
Tool features:
We are also happy to discuss variations or other requirements.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
These are highly effective drilling tools that create recesses such as O-rings or
sealing surfaces that are difficult or much more inefficient to produce using other manufacturing methods.
They are available in a very simple form, straight fluted with only one shape (function).
Or highly complex as part of multi-fluted step drills.
We have chosen a tool from the valve industry as an example.
Of course, many variations are possible.
Please contact us for individual training. We will be happy to show you the programming and all the tricks you can use to make these tools as easy as possible.
Tool Features:
You always have the choice: Buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Plotter knives come in many different designs.
Are you looking for a way to make these tools?
We have created three examples with different geometries.
These include Plotter Knife B with an asymmetrical cutting geometry.
But be careful, the correct clamping is just as important as the program. Your trusted machine manufacturer can help you here so that you can also produce these great tools using the automatic loader.
Tool features:
You always have the choice: buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Do you have a customer request and need a sample program?
We have programmed a core drill that can serve as a perfect template.
Trust our proven quality and save yourself a lot of trial and error.
Quick to obtain, just as quick to understand and modify.
Tool features:
Of course, we can also provide you with training on the programming and its special features.
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Machining the exit of the hole can cause major problems with some components.
If high demands are made and a burr-free surface is absolutely essential, the
question of economical machining arises.
With a Back Chamfer function, the hole can be drilled in a single pass and the entry and exit of the hole can be perfectly deburred.
Cleverly and gradually reground, these tools can also be used multiple times in a reliable process.
Tool features:
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
A roughing / finishing end mill with separated cutting edges.
3 flutes with roughing profile and 3 flutes are smooth.
With an innovative roughing/finishing design plus adapted rake angles, the machining of difficult-to-cut materials is no longer a problem.
A classic and a „must have“ in any good tool selection.
Also, a perfect tool for further optimization and adapted variants such as unequal pitch or different helix angles.
Tool features:
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our example tool is a high-end application for the air defense industry.
Special attention was paid to form tolerance and staggered teeth.
The staggered teeth ensure that the forces are „neutralized“ in a component that is sensitive to vibration.
The staggered teeth were produced using a special time-saving production method instead of the usual flute grinding.
Tool features:
Interested in all types of T-slot cutters? Feel free to contact us!
We can address all aspects of your production needs.
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
High feed end mills have become an integral part of the industry.
All the major manufacturers serve this market with their own individual solutions.
We often hear:
We would like to grind them, but it is not possible with Numroto.
However, just as with barrel cutters, this is not really a problem for Numroto.
We have therefore chosen an example that you can use to create your own product line.
Variation of the number of teeth, pitch, normal or radial relief as well as special face shapes, everything is possible.
Tool features:
You always have the choice: Buy only the tool or, if required, additional training.
— Training only useful for experienced users —
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
High process reliability combined with efficiency and precision.
-The Barrel Cutter for success
We often hear the following:
— Yes, it’s a pity that we can’t program and grind barrel tools with Numroto. —
But that’s not true!
If you are familiar with the form cutter package, you can indeed produce such tools.
Our example tool shows how it can be done.
Countless variations are possible; the only limit is your own imagination.
Tool Features:
You always have the choice: Buy only the tool or, if required, additional training.
— Training only useful for experienced users —
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
The flat-bottom geometry is alwaysrequested when the customer needs a completely straight (flat) blind hole.
This is exactly what you can achieve with this tool.
Tool Features:
We will be happy to explain the programming in detail.
— Can also be used for 3-flute tools —.
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
We get asked all the time for unusual geometries like this one.
What looks complicated and „fancy“ at first glance is actually not that big a deal if you know how to do it.
You’ll be surprised how easy it is to program these tools if you keep a few basics in mind.
Tool Features:
Great tool for knowledge transfer.
Easy to modify and adapt to your individual needs
In this example, no special operations are required.
— All operations are „standard“ operations from the „end mill package“. —
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
The up-and-down compression router is used primarily for composite materials.
It primarily prevents delamination and eliminates the need for post-processing.
It is also commonly used for wood or plastic.
If you rarely make up-and-down routers, you may want to save yourself the new program package.
We will show you how to program such tools in the standard end mill package.
If you are not afraid to put in some effort, you can program tools that are currently not even possible in the official Up & Down package.
Tool features:
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Price per hour: 145 CHF/h
Daily rate 8h: 1100 CHF
Half day 4h: 580 CHF
Pricing of tools:
All ASC tools = 485CHF
All others = 395CHF
-Prices are rounded-
8h | 16h | 24h | 32h | 40h |
140 CHF/h | 135 CHF/h | 130 CHF/h | 125 CHF/h | 120 CHF/h |
1100 CHF | 2150 CHF | 3100 CHF | 4000 CHF | 4800 CHF |
1x 25% new customer discount on one (1) tool of your choice.
„Product training light“ database tool + 22% discount on 4h online training
With our „Product Training Light“ you buy a tool of your choice and receive a 4h online training from us with the aim of explaining and understanding the tool in detail.
Ideal for 2 online meetings of 2h each
Perfect format to cover the most important aspects of programming.
We will also give you tips for trouble-free setup.
Example price:
F2 / Elite Performance Steel Roughing Geometry: 395CHF
+22% discount on 4h online training on offer: 450CHF instead of 580CHF
845CHF
ASC-Tools: Buy 5 pay only 4
„Non“ ASC-Tools: Buy 5 pay only 4
Attention:
Offers cannot be combined!
High feed end mills have become an integral part of the industry.
All the major manufacturers serve this market with their own individual solutions.
We often hear:
We would like to grind them, but it is not possible with Numroto.
However, just as with barrel cutters, this is not really a problem for Numroto.
We have therefore chosen an example that you can use to create your own product line.
Variation of the number of teeth, pitch, normal or radial relief as well as special face shapes, everything is possible.
Tool features:
You always have the choice: Buy only the tool or, if required, additional training.
— Training only useful for experienced users —
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
High process reliability combined with efficiency and precision.
-The Barrel Cutter for success
We often hear the following:
— Yes, it’s a pity that we can’t program and grind barrel tools with Numroto. —
But that’s not true!
If you are familiar with the form cutter package, you can indeed produce such tools.
Our example tool shows how it can be done.
Countless variations are possible; the only limit is your own imagination.
Tool Features:
You always have the choice: Buy only the tool or, if required, additional training.
— Training only useful for experienced users —
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
The up-and-down compression router is used primarily for composite materials.
It primarily prevents delamination and eliminates the need for post-processing.
It is also commonly used for wood or plastic.
If you rarely make up-and-down routers, you may want to save yourself the new program package.
We will show you how to program such tools in the standard end mill package.
If you are not afraid to put in some effort, you can program tools that are currently not even possible in the official Up & Down package.
Tool features:
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
We get asked all the time for unusual geometries like this one.
What looks complicated and „fancy“ at first glance is actually not that big a deal if you
know how to do it.
You’ll be surprised how easy it is to program these tools if you keep a few basics in mind.
Tool Features:
Great tool for knowledge transfer.
Easy to modify and adapt to your individual needs
In this example, no special operations are required.
— All operations are „standard“ operations from the „end mill package“. —
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
The winner in cost per part.
Means unmatched value for the customer.
Tool features:
Secure your training today and gain the knowledge you need to impress your customers with these fantastic tools in the future.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Machining the exit of the hole can cause major problems with some components.
If high demands are made and a burr-free surface is absolutely essential, the
question of economical machining arises.
With a Back Chamfer function, the hole can be drilled in a single pass and the entry and exit of the hole can be perfectly deburred.
Cleverly and gradually reground, these tools can also be used multiple times in a reliable process.
Tool features:
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
If you want to rough as much as possible as fast as possible, this is the tool for you.
Our 16mm steel roughing geometry is ideally suited and an absolute top performer.
The calculated tool geometry has been thought through down to the last detail, and with 6 cutting edges it gives you the maximum performance you are looking for.
In addition, the end face is designed to easily support all plunge strategies. Whether it be ramping, pendulum, helical plunging or even drilling/piercing.
Tool Features:
Easy to modify and adapt to your individual needs.
If you need help regrinding these great tools, you can always ask us for a workshop.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
7 fluted Elite Performance end mill for machining high-alloy steels and special alloys.
Experts agree that the harder the material, the more productive it is to switch to TPC milling.
Our tool is tailor-made for such TPC (trochoidal milling) applications.
These are the benefits that can be achieved with this tool:
Very high metal removal rates, large cutting depths, low tool wear, lowest cutting forces, high process reliability.
Tool features:
Easily modifiable and adaptable to your individual needs.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Machining titanium is difficult for well-known reasons.
It is therefore even more important that the tool design is prepared for these difficult operating conditions.
Our titanium HPC end mills are specially designed for this.
We offer you the perfect balance of a sharp yet stable cutting edge paired with a robust core and technology that suppresses any oscillation and vibration.
For the final „touch“, we recommend a cutting-edge treatment in the micron range, which can be done directly on your CNC.
Ask specifically for „SKP on the CNC machine“ and we will implement this process with you.
Tool features:
This has been achieved by optimized radii in the gash, as well as an adapted widening and a stabilized corner chamfer.
An ideal tool you can rely on.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Hard machining plays an important role in die and mold making. It is also seen as a major challenge.
We have further improved the existing tool geometries and offer you an optimum of geometry and design.
We also recommend cutting edge treatment in the µ-range, which can be done directly on your CNC.
Just ask us about „SKP on the CNC“.
Tool features:
You can easily adapt our HRC Max. hard geometry to less hard materials by adjusting the rake angle.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
One tool for a variety of applications in steel, cast iron and stainless steel.
If you are looking for an end mill that just does the job, you will be pleased with our all-purpose geometry.
It is an indestructible companion that will be met with great enthusiasm.
Tool Features:
A tool that does what it is supposed to do, which is work.
Best produced within the automatic loader and in high volumes. We can show you how to make the necessary optimizations.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Similar to our popular general purpose steel tool.
The only difference is that we have pursued the goal of offering a high-performance aluminum geometry.
You will not be disappointed and can look forward to maximum feed rates and very smooth operation.
Also suitable for machining PMMA (Acrylic, Plexiglas) as well as PEEK, Honeycomb Sandwich and Cu.
Tool features:
A tool that does what it is supposed to do, which is work.
Best produced with an automatic loader and in large quantities. We can show you how to make the necessary improvements.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Part of our high volume 16mm roughing tool family.
Our Elite Performance aluminum roughing geometry is used when only one thing matters: cutting as much material as possible in the shortest amount of time.
Ultra-stable and sharp at the same time.
Thanks to the polished trapezoidal tooth we use, this tool produces a full 100% overlap. So you don’t have to worry about bad surfaces.
Plus, there’s a true radial relief surface that stabilizes the cut and prevents it from pulling into the material.
Tool Features:
Tool can be resharpened multiple times for a real cost per part advantage.
If you have any problems, we will be happy to help you.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
On popular demand, we now offer 2 tools that meet the requirements of a modern pocket end mill.
We looked around the market and finally programmed the „Master of Pockets“.
This is a version with special angles and geometries for machining aluminum.
Since this tool cannot be ground with our conventional end mill package, we had to switch to the form cutter package.
But don’t worry, you’ll quickly lose your fear of this programming once you see how we designed this tool.
Tool Features:
Of course, you can easily customize this tool by varying the cutting length or corner radius.
This allows you to offer a tool that meets the customer’s needs by 100%.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
On popular demand, we now offer 2 tools that meet the requirements of a modern pocket end mill.
We looked around the market and finally programmed the „Master of Pockets“.
This is a version with special angles and geometries for machining steel.
Since this tool cannot be ground with our conventional end mill package, we had to switch to the form cutter package.
But don’t worry, you’ll quickly lose your fear of this programming once you see how we designed this tool.
Tool Features:
Of course, you can easily customize this tool by varying the cutting length or corner radius.
This allows you to offer a tool that meets the customer’s needs by 100%.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
A special type of step drill with an overhanging contour.
These tools can be made using a special technique and a special wheel.
Our example combines the O-ring function with that of the sub land step drill.
Like no other tool, it shows what is possible in the field of step drills.
Tool features:
We are also happy to discuss variations or other requirements.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
There are several advantages to designing a tool with a special flute shape/wheel.
With a specially calculated flute shape/wheel, it is possible to produce cross sectional profiles that
cannot be realized with normal wheels.
Another important advantage is that special geometries can be developed and patented.
– A new and unique material-specific flute shape would therefore be an outstanding feature. With all the advantages
– It is possible to develop geometries that are very material specific and perform significantly better than competing tools.
Tool features:
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Many companies are still afraid of thread mills. High investment costs and a lack of know-how are
the reasons why many prefer to keep their hands off an entire family of tools.
However, the profit margins for threading tools in particular are high and the competition is manageable.
Numroto offers a specific additional program for threading tools that is not officially advertised, but is very powerful.
We can calculate and simulate virtually all types of threads and simulate them entirely in 3D.
From very simple thread mills to drill thread mills or circular thread mills, everything is possible.
As an example, we have created a tool for you that includes some of the most advanced features.
Tool Features:
If you are planning to manufacture your own threading tools in the future, we will be happy to help you with the implementation.
Of course, we will also discuss the necessary grinding wheels and dressing technology.
Info:
Implementation requires precise planning and close cooperation.
However, you always have the choice: Buy only the tool or, if required, additional training.
— Only suitable for very experienced programmers or machine operators. —
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
These are highly effective drilling tools that create recesses such as O-rings or
sealing surfaces that are difficult or much more inefficient to produce using other manufacturing methods.
They are available in a very simple form, straight fluted with only one shape (function).
Or highly complex as part of multi-fluted step drills.
We have chosen a tool from the valve industry as an example.
Of course, many variations are possible.
Please contact us for individual training. We will be happy to show you the programming and all the tricks you can use to make these tools as easy as possible.
Tool Features:
You always have the choice: Buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Plotter knives come in many different designs.
Are you looking for a way to make these tools?
We have created three examples with different geometries.
These include Plotter Knife B with an asymmetrical cutting geometry.
But be careful, the correct clamping is just as important as the program. Your trusted machine manufacturer can help you here so that you can also produce these great tools using the automatic loader.
Tool features:
You always have the choice: buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Do you have a customer request and need a sample program?
We have programmed a core drill that can serve as a perfect template.
Trust our proven quality and save yourself a lot of trial and error.
Quick to obtain, just as quick to understand and modify.
Tool features:
Of course, we can also provide you with training on the programming and its special features.
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Machining the exit of the hole can cause major problems with some components.
If high demands are made and a burr-free surface is absolutely essential, the
question of economical machining arises.
With a Back Chamfer function, the hole can be drilled in a single pass and the entry and exit of the hole can be perfectly deburred.
Cleverly and gradually reground, these tools can also be used multiple times in a reliable process.
Tool features:
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
A roughing / finishing end mill with separated cutting edges.
3 flutes with roughing profile and 3 flutes are smooth.
With an innovative roughing/finishing design plus adapted rake angles, the machining of difficult-to-cut materials is no longer a problem.
A classic and a „must have“ in any good tool selection.
Also, a perfect tool for further optimization and adapted variants such as unequal pitch or different helix angles.
Tool features:
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our example tool is a high-end application for the air defense industry.
Special attention was paid to form tolerance and staggered teeth.
The staggered teeth ensure that the forces are „neutralized“ in a component that is sensitive to vibration.
The staggered teeth were produced using a special time-saving production method instead of the usual flute grinding.
Tool features:
Interested in all types of T-slot cutters? Feel free to contact us!
We can address all aspects of your production needs.
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
High feed end mills have become an integral part of the industry.
All the major manufacturers serve this market with their own individual solutions.
We often hear:
We would like to grind them, but it is not possible with Numroto.
However, just as with barrel cutters, this is not really a problem for Numroto.
We have therefore chosen an example that you can use to create your own product line.
Variation of the number of teeth, pitch, normal or radial relief as well as special face shapes, everything is possible.
Tool features:
You always have the choice: Buy only the tool or, if required, additional training.
— Training only useful for experienced users —
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
High process reliability combined with efficiency and precision.
-The Barrel Cutter for success
We often hear the following:
— Yes, it’s a pity that we can’t program and grind barrel tools with Numroto. —
But that’s not true!
If you are familiar with the form cutter package, you can indeed produce such tools.
Our example tool shows how it can be done.
Countless variations are possible; the only limit is your own imagination.
Tool Features:
You always have the choice: Buy only the tool or, if required, additional training.
— Training only useful for experienced users —
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
The flat-bottom geometry is alwaysrequested when the customer needs a completely straight (flat) blind hole.
This is exactly what you can achieve with this tool.
Tool Features:
We will be happy to explain the programming in detail.
— Can also be used for 3-flute tools —.
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
The up-and-down compression router is used primarily for composite materials.
It primarily prevents delamination and eliminates the need for post-processing.
It is also commonly used for wood or plastic.
If you rarely make up-and-down routers, you may want to save yourself the new program package.
We will show you how to program such tools in the standard end mill package.
If you are not afraid to put in some effort, you can program tools that are currently not even possible in the official Up & Down package.
Tool features:
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
We get asked all the time for unusual geometries like this one.
What looks complicated and „fancy“ at first glance is actually not that big a deal if you know how to do it.
You’ll be surprised how easy it is to program these tools if you keep a few basics in mind.
Tool Features:
Great tool for knowledge transfer.
Easy to modify and adapt to your individual needs
In this example, no special operations are required.
— All operations are „standard“ operations from the „end mill package“. —
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
The winner in cost per part.
Means unmatched value for the customer.
Tool features:
Secure your training today and gain the knowledge you need to impress your customers with these fantastic tools in the future.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Top-notch programming examples for a staggered 36-flute side milling cutter.
Although these tools are relatively simple, they are a challenge for many.
However, we believe that fear of these tools is completely unfounded.
You can be even more confident if you use our perfectly coordinated sample program as a template.
It incorporates the best current practices and methods for production.
For example, the flutes are no longer produced in a straight line, instead they are created using a kind of gash-out.
Not only is this 2-3 times faster than conventional flute grinding, but we also have the ability to design the tooth shape very easily and as needed.
If you study this program carefully, you can easily switch to other dimensions.
Tool features:
Easy adaptation to all possible dimensions.
For maximum success, we recommend side milling cutter training.
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Top-notch programming examples for a staggered 12-flute side milling cutter.
Although these tools are relatively simple, they are a challenge for many.
However, we believe that fear of these tools is completely unfounded.
You can be even more confident if you use our perfectly coordinated sample program as a template.
It incorporates the best current practices and methods for production.
For example, the flutes are no longer produced in a straight line, instead they are created using a kind of gash-out.
Not only is this 2-3 times faster than conventional flute grinding, but we also have the ability to design the tooth shape very easily and as needed.
If you study this program carefully, you can easily switch to other dimensions.
Tool features:
Easy adaptation to all possible dimensions.
For maximum success, we recommend side milling cutter training.
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our 6-flute lollipop cutter
The ultimate benchmark with 6 cutting edges for maximum performance.
If you rarely work with this particular type of „deburring cutter“, you may find it a little difficult to program.
All the better that we have already done it for you.
With this tool you can deburr safely even in the most difficult situations.
Sturdy design with a cutting ability that not many others can match.
Of course, it is absolutely true to size thanks to its flute form adaptation.
Special attention has been paid to an almost constant positive rake angle along the entire form. Many other tools on the market only have a positive angle at the top.
Tool Features:
Wonderful programming example for knowledge sharing.
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our 4-flute lollipop cutter
If you rarely work with this particular type of „deburring cutter“, you may find it a little difficult to program.
All the better that we have already done it for you.
With this tool you can deburr safely even in the most difficult situations.
Sturdy design with a cutting ability that not many others can match.
Of course, it is absolutely true to size thanks to its flute form adaptation.
Special attention has been paid to an almost constant positive rake angle along the entire form. Many other tools on the market only have a positive angle at the top.
Tool Features:
Wonderful programming example for knowledge sharing.
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
A great example of a dovetail cutter.
These tools look simple at first glance, but have some details that make them difficult to master.
A major problem is certainly the steeply tapered flute.
This makes it impossible to program a high rake angle.
To compensate for this, we have programmed a constant high helix angle along the form, which is machined with a small flute wheel.
The result is that even difficult-to-machine materials can be machined.
A really great program for knowledge transfer.
Tool features:
Easy adaptation to all possible dimensions
Best purchased with a short training course.
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
For those who throw up their hands when they see an eccentric boring bar with a DXF form.
Take a look at what we have to offer and become a true fan of this family of tools.
Our „DXF Form Boring Bar“ is a classic eccentric boring bar with a DXF form.
In our example, we have deliberately avoided using the clamping system transformation and the unpopular „independent plane“.
This means You can get very good results without any unnecessary nonsense.
Basically, there are only 3 values of the manual grinding path that are responsible for the design of the excenter.
If you study them carefully, you can easily adapt the excenter to other diameters.
If you wish, we can show you how the manufacturing process works with clamping system transformation and „independent plane“.
Tool features:
Easy adaptation to all possible dimensions.
For maximum success, we recommend that you attend an eccentric boring bar training course.
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
For those who throw up their hands when they see an eccentric boring bar.
Take a look at what we have to offer and become a true fan of this family of tools.
Our „Standard Boring Bar“ is a classic eccentric boring bar.
In our example, we have deliberately avoided using the clamping system transformation and the unpopular “ independent plane „.
This means: You can achieve very good results without any unnecessary nonsense.
Basically, there are only 3 values of the manual grinding path that are responsible for the design of the excenter.
If you study them carefully, you can easily adapt the excenter to other diameters.
If you wish, we can show you how the manufacturing process works with clamping system transformation and „independent plane“.
Tool features:
Easy adaptation to all possible dimensions.
For maximum success, we recommend that you attend an eccentric boring bar training course.
You always have the choice: Buy only the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our Step Drill-11 is a perfect programming example for anyone interested in a multi-step drill
with DXF form and CEC.
This tool has a DXF form on all steps that has also been corrected with a CEC.
This not only ensures dimensional accuracy, but also adapts the cutting geometry to the material.
The shear angle for this program is 15°.
Multi-step drills are often difficult to produce. Our example shows how it can be done.
If you study it carefully, you can safely program step drills with multiple steps.
We have chosen „Peak Performance Stainless Plus“ as the basic tip geometry.
Tool Features:
Easy adjustment to all possible dimensions.
For maximum success, we recommend training for step drills.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our Step Drill-10 is a perfect programming example for anyone interested in a multi-step drill.
The proven cam relief is used as the step type.
Multi-step drills can often be difficult to program. Our example shows how to do it.
If you study it carefully, you can program multi-step drills with ease.
We have chosen the proven „Peak Performance Stainless Plus“ as the basic tip geometry.
Tool Features:
Easily adaptable to all possible dimensions.
For maximum success, we recommend step drill training.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our Step Drill-9 is a perfect programming example for anyone interested in a step drill with DXF form and FFA.
It is particularly suitable for materials that are difficult to machine.
The step has deliberately not been corrected with a CEC (cutting edge correction) in order to maintain the full sharpness of the helix angle.
For perfect dimensional accuracy, the step has been adapted with FFA (flute form adaptation).
The DXF form is a sample form with a radius on the inside and a flat chamfer on the outside.
The proven „Peak Performance Stainless Plus“ was selected as the basic tip geometry.
Tool Features:
Quick and easy adaptation to all possible dimensions
Step drill for difficult to machine materials.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our Step Drill-8 is a perfect programming example for anyone interested in a step drill with DXF form and CEC.
It is especially useful for machining difficult-to-machine materials.
In this program, the step angle is generated with a DXF form that has also been corrected with a CEC.
This not only ensures dimensional accuracy, but also adapts the cutting-edge geometry to the material. The shear angle in this program is 15°.
The dxf form is a example form with a radius on the inside and a flat chamfer on the outside.
We have chosen the proven „Peak Performance Stainless Plus“ as the basic tip geometry.
Tool Features:
Quick and easy adaptation to all possible dimensions
Step drill for difficult to machine materials.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our Step Drill-7 is a perfect programming example for those interested in a step drill
with step relief + CEC.
It is particularly suitable for materials that are difficult to machine.
The step angle in this program is created with a step relief.
A relief is sharper than a cam grind, but not quite as stable.
This was then deliberately „corrected“ with a CEC to an shear angle of 15°. This not only ensures dimensional accuracy, but also matches the edge geometry to the material.
The proven „Peak Performance Stainless Plus“ was chosen as the basic geometry of the tip.
Tool features:
Quick and easy adaptation to all possible dimensions
Step drill for difficult to machine materials.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our Step Drill-5 is a perfect programming example for those who are interested in a step drill with
step relief and FFA (Flute Form Adaptation).
In this program, the step angle is produced with a step relief.
A relief is sharper than a cam, but not quite as stable.
The step is deliberately not corrected with a CEC (cutting edge correction) in order to maintain the full sharpness of the helix angle.
To achieve perfect dimensional accuracy, the step was corrected with the FFA.
We chose „peak performance general purpose steel“ as the basic geometry of the tip.
Tool features:
Easily adaptable to all possible dimensions.
A really good all-rounder that works very well.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our Step Drill-6 is a perfect programming example for those interested in a step drill with cam relief + CEC.
It is particularly suitable for materials that are difficult to machine.
In this program, the step angle is created with a cam relief.
This is then deliberately „corrected“ to a 15° shear angle with a CEC. This not only ensures dimensional accuracy, but also adapts the cutting-edge geometry to the material.
The proven „Peak Performance Stainless Plus“ was chosen as the basic geometry of the tip.
Tool features:
Quick and easy adaptation to all possible dimensions
Step drill for difficult to machine materials.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our Step Drill-4 is a perfect programming example for anyone interested in a step drill with a cam relief as a step.
In this program, the step angle is generated with a cam relief.
The step was intentionally not corrected with a CEC (cutting edge correction) in order to maintain the full sharpness of the helix angle.
We have chosen the proven „Peak Performance General Purpose Steel“ as the basic geometry of the tip.
Tool Features:
Easily adaptable to all possible dimensions.
A really good all-rounder that works very well.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our Step Drill-3 is a perfect programming example for those interested in tools with a sub
land, step face cam and CEC (cutting edge correction).
In this program, the step angle is generated with a cam relief.
This is then intentionally „corrected“ to a 20° shear angle with a CEC. This not only ensures dimensional accuracy, but also adapts the cutting geometry to the material.
One of the major advantages of sub-lands is that very short step lengths can be produced, which can then be reground almost indefinitely.
We have chosen the „Peak-Performance-Steel-Plus“ as the base geometry for the tip.
Tool features:
Easily adaptable to all possible dimensions.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our Step Drill-2 is a perfect programming example for anyone interested in tools with sub land and DXF form.
The form was intentionally not corrected with a CEC (cutting edge correction) in order to maintain the full sharpness of the helix angle.
To ensure that the shape remained dimensionally accurate, it was adapted with a flute form adaptation.
A 55° step angle with an inside chamfer and an outside radius was selected as the example shape.
One of the major advantages of the sub land design is that very short step lengths can be produced which can then be reground almost indefinitely.
The proven Peak Performance Steel Plus was selected as the base tip geometry
Tool features:
Easily adaptable to all possible dimensions.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our „straight fluted cast iron & aluminum“ geometry is designed as a step drill with 2 form steps.
One step is designed as a „DXF form“ and the other as a normal „step relief“.
Use this tool to realize your own applications.
Ideal for know-how transfer.
The main application for these tools is in the automotive industry.
For example, cylinder blocks and heads, housings, steering knuckles and brake cylinders, as well as core hole drilling.
Depending on your requirements, we can also show you special methods for flute polishing.
Tool Features:
Easy to adapt to all possible dimensions.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
For those who demand the very best.
The 3+6 extra drill reamer is the top of the line in our family of drill reamers.
With 3 drilling edges and 6 real reaming edges, it leaves no doubt about its performance.
The same 3-flute high performance drill with sub land, but with 6 real reaming edges.
This has been made possible by the systematic use of specially calculated flute geometry and a form wheel.
Of course, the reaming edges can be easily modified at any time.
For example, it is possible to program a double angle instead of a 45° chamfer using a DXF form.
The micro-geometry can also be adapted very easily.
This makes it possible to create material-specific chamfers that are perfectly matched to the application.
Best of all, thanks to the sub land design, this tool can be resharpened almost indefinitely.
Tool features:
Our „Drill Reamer Steel 3+6 Extra“, the best solution in the field of drill reamers.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our „Drill Reamer Steel 3+3 Extra“ has 3 real reaming edges.
No false promises of a reaming function that does not exist.
We have chosen a 3-flute high performance drill with a sub land as the base and added 3 real reaming edges.
The reaming edges can also be easily changed at any time.
For example, it is easy to program a double angle instead of a 45° chamfer using a DXF form.
The micro-geometry can also be adapted very easily.
This makes it possible to create material-specific chamfers that are perfectly matched to the application.
Best of all, thanks to the sub land design, this tool can be resharpened almost indefinitely.
Our „Drill Reamer Steel 3+3 extra“, for those who love details
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
The Maximum Feed Stainless Plus has several advantages.
It has the same tremendous performance as the Maximum Feed Alu Plus“ and the Maximum Feed Steel Plus“, but does not require the use of form wheels.
At the Academy we always try to find the best way for you. This includes optimizing the technology used.
Not every geometry requires a form wheel. That’s why we can confidently work without one here.
You can still enjoy the benefits of this great geometry: Cutting ability, stability and simple design.
In addition, the material-optimized active center point provides excellent drilling performance.
Tool features:
The Maximum Feed Stainless Plus is an ideal tool with enormous added value.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our „Peak Performance Straight Fluted Cast Iron &
Aluminum“ is the ideal solution for aluminum-silicon alloys and all other types of cast iron, including gray iron, vermicular graphite iron and ductile iron.
Used primarily in the automotive industry.
For example, cylinder blocks and heads, housings, steering knuckles and brake cylinders, and core hole drilling.
Depending on your requirements, we can also show you special methods for flute polishing.
Tool Features:
The „Peak-Performance Straight Fluted Cast Iron & Aluminum“ is practically a „must have“ in every good tool assortment.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Nowadays, most tools are very similar except for a few little details.
Our ‚Steel & Stainless Geometry Exotic‘ is an example of how there is still a lot to be discovered outside the mainstream.
A prime example of how you can achieve the extraordinary with just slightly modified standard wheels (larger radii) and no special operations.
So, if you are looking for something that not everyone else has to offer, you should take a closer look at this geometry.
Of course, you can use it as a base to develop all kinds of improvements and variations to suit your individual needs.
As already mentioned, you don’t need any form wheels for this geometry. All you see here are optimized standard operations of Numroto with standard wheels.
Tool features:
Can be ground completely without a form wheel.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
The Parabol Stainless Plus is an offshoot of our parabolic flute tool group.
We have adjusted the flute curvature and core diameter to be ideal for machining stainless and tough steels.
A sharp center with excellent centering properties and directly following margins for both performance and hole quality.
A perfect base and starting point for many further optimizations.
You can customize the curvature and pitch of the flutes, the tip, the number of flutes and the core diameter to create your own tool.
Of course, we are happy to help you with this as well.
Tool features:
Of course, the program comes with flute shape and calculated flute wheel.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
The counterpart to the Maximum Feed Alu Plus is the Maximum Feed Steel Plus.
As the name suggests, everything has been geared towards high-volume steel machining.
We have used a geometry that has been around even longer than CNC machines: the parabolic flute shape and a special version of the spiral point that creates a pilot tip in the center.
Of course, all of this is calculated, simulated and made available to you using the latest 3D models.
This geometry combines cutting performance, stability and a simple design.
Tool features:
Of course, the program comes with the flute shape and the calculated flute wheel.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
For those who can’t get enough.
With the Maximum Feed Alu Plus, the name says it all: it allows extremely high feed rates in aluminum like no other tool.
The flute geometry is extremely sharp in the main area, but has a built-in protection area in the upper area, which protects the otherwise much too sharp cutting edge from chattering and pulling in.
This is made possible by the intelligent use of a calculated flute wheel.
Of course, the program is written in a way that the flutes can be polished to a mirror finish and are slightly tapered towards the back.
This geometry is predestined for maximum feed rates and high cutting volumes.
The slim core diameter and our signature gash-out complete this great high-performance geometry.
Tool Features:
Of course, the program comes with the flute shape and the calculated flute wheel.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
The Maximum Sharp Drill is designed to minimize cutting force and displacement in tough materials.
The use of a form wheel allows the core diameter to be minimized while maximizing the material on the back.
This provides up to 18% more helical cutting edge compared to a tool with a standard core.
The proven decreasing core diameter also provides improved chip flow.
Also on board is the 4th margin, which has been moved to the rear and is additionally beveled with a small corner chamfer.
Tool Features:
Of course, the program comes with the flute shape and calculated flute wheel.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
Our Elite-Performance Chip Control Deep is a special geometry designed for deep hole drilling.
Its straight and negative flute, created by a form wheel, is ideal for chip breaking.
The core diameter is selected to be in the sweet spot of stability and chip clearance.
The slightly decreasing core diameter also improves chip flow.
A special feature is the 4th margin, which has been moved to the rear and is also chamfered.
The combination of a narrow chip space, a relatively shallow 2nd clearance angle and optimized gash-out results in a 4th margin that is less than 1 mm behind the cutting edge.
Tool Features:
Elite-Performance Chip Control Deep is an ideal foundation for deep hole drilling.
Of course, the program comes with the flute shape and calculated flute wheel.
If you wish, we can also help you adjust for overlengths. Or we can train you in the setup.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
The gold standard for drilling aluminum and other non-ferrous metals.
Specially adapted for optimum performance.
Highly polished flutes for smooth chip evacuation and to prevent material build-up.
Slightly tapered core diameter for improved chip flow.
4 margins prevent the drill from „walking“ and support the process.
Tool Features:
Perfect tool for aluminum and other non-ferrous metals. Simple, straightforward and powerful.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
A geometry optimized for stainless steel.
Further increased performance and adjustments for difficult-to-cut materials.
An adapted rake angle increases the cutting capacity, while the negative land ensures that the drill does not pull into the material.
The cutting edge is further stabilized by a small corner chamfer.
The extra wide 4th margin provides additional stability, but has been reduced at the start to prevent jamming.
The gold standard for hard-to-cut materials. Yet easy to set up and completely free of special operations or form wheels.
Tool features:
Optimized geometry for difficult-to-cut materials that will not disappoint.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
A geometry optimized for steel.
4 guiding margins for increased precision.
There is a special micro-geometry in the center that creates a small center point. This results in superior drilling performance and positioning accuracy.
An excellent solution for high performance and quality requirements.
Tool features:
Robust and efficient tool for use in demanding applications.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
A drill for a wide range of applications in steel, cast iron and stainless steel.
At the same time, it is very easy to manufacture and the production time is short.
If you are looking for a drill that simply works well, you will be pleased with our general-purpose steel geometry.
It is an indestructible companion that will be met with great enthusiasm.
Tool features:
A tool that does what it is supposed to do, which is work.
You always have the choice: buy just the tool or, if required, additional training.
*In case of video quality problems, please adjust the settings at the bottom right. In case of display problems, please deactivate the adblocker.
A drill for a wide range of applications in steel, cast iron and stainless steel.
At the same time, it is very easy to manufacture and the production time is short.
If you are looking for a drill that simply works well, you will be pleased with our general-purpose steel geometry.
It is an indestructible companion that will be met with great enthusiasm.
Tool features:
A tool that does what it is supposed to do, which is work.
You always have the choice: buy just the tool or, if required, additional training.
